DX51-Z20-Z275 Hot Dipped Galvanized Steel Coil 0.12-6mm Thickness
Building Roofing Sheet Safety Fence Applications
Description:
What is Galvalume Steel? Galvalume steel is carbon steel coated
with an alloy that combines the impervious properties of aluminum
with the malleability and galvanic protection of zinc. The alloy
coating gives galvalume steel coil and sheets a smooth, plain
finish.
Product Name | G550 Z275g Hot dipped galvanized steel coil and strip |
Material | SGCC/SGCD/CGCC/TDC51DZM/DX53D |
Zinc Coating | Z40-275 |
Coil weight | 4-5tons |
Coil id | 508/610mm |
Package | Standard Sea Worthy Package |
MOQ | 25tons |
Spangle | Normal Spangle,Mini Spangle,Big Spangle |
Certificate | SGS,ISO |
Application | Building, Roofing sheet, Safety Fence And So On. |
| Chemical Composition |
| GRADE | C | Si | Mn | P | S | Ti |
| SGCC/DX51D+Z | ≤0.10 | ≤0.50 | ≤0.60 | ≤0.10 | ≤0.030 | ≤0.020 |
| DX52D+Z | ≤0.10 | ≤0.50 | ≤0.60 | ≤0.10 | ≤0.030 | ≤0.020 |
| SGCD/DX53D+Z | ≤0.10 | ≤0.30 | ≤0.50 | ≤0.05 | ≤0.030 | ≤0.020 |
| SGCE/DX54D+Z | ≤0.10 | ≤0.30 | ≤0.30 | ≤0.03 | ≤0.020 | ≤0.020 |
| DX56D+Z | ≤0.10 | ≤0.30 | ≤0.30 | ≤0.03 | ≤0.020 | ≤0.020 |
| Structural | ≤0.20 | ≤0.60 | ≤1.70 | ≤0.10 | ≤0.045 | |
Product Details:
Surface Details
Workshop Details
Galvanizing steel production line with annual output of 200000
tons, which adopts the mo
st advanced American GBNB and Germany's Siemens electrical control
systems. it can produce ZERO
zinc spangle, small-zinc spangle and common zinc spangle
etc.Thickness from 0.125 mm to 4.5mm,
and width from 500 mm to 1250 mm, and zinc coating from 40 - 275
g/m2,surface passivation and oil
-coating can be performed. In addition, the company introduces a
slitting machine, which can meet
the customers' different requirements on the width. And Two
roll-formed machines , which can produce
wave roofing sheet and Trapezoidal corrugated sheet.
Our service
1.Cut large coils into small coils.
For steel coils, we can cut one large steel coil into small steel
coils for loading at seaport;
because for container shipping, each container usually loads weight
can not be over 26 tons, but
each large coil is usually about 28 tons, so one large coils has to
be cut into small coils,
and because the forklift usually takes 7-10 tons at seaport, so for
easy loading into conatiner,
each large steel coil usually is cut into 3 small coils. For bulk
vessel shipping, it usually
demands coils weight under 18 tons, so most times, also need cut
one large coil into 2 small coils.
2.Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils
into steel plate, so we open
flat the coils and cut the coils to steel plate to the sizes as
required. For saving cost for loading
by container, load into 20 feet containers, so cut the length under
5800mm, usually as required to
cut to length 2440mm and 5800mm, width usually be 1220mm and
1500mm.after cutting the steel coils into
steel plate, we can do black paints on the surface of the plate to
make the plate to be anti-rust.
Our certification
FAQ:
Q:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the
number of tons you need to purchase.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality
before packaging, and unqualified products will be destroyed.we
accept the third party inspection absolutely.
